Roland GAIA SH-10001973 - Manual (Page 11)

11
5
STEP
Create A Distorted Guitar
Sound
The GAIA SH-01 contains a powerful eff ects section that lets you use fi ve eff ects simultaneously.
Let’s try creating the sound of a distorted guitar.
1.
Call up the “PRESET A-6” patch.
Press the [PRESET
PATCH] button
Press the [6] button Press the [BANK] button and
then press the [1] (A) button
2.
Press the [KEY HOLD] button to turn off its
illumination.
3.
First, let’s listen to the undistorted sound.
Press the EFFECTS [DIST] button so its light is off , and play the
keyboard.
You’ll hear the undistorted sound.
4.
Press the EFFECTS [DIST] button so it’s lit, and
play the keyboard again.
Play two-fi ngered chords to simulate the performance of a rock
guitarist.
If you hold a note for a while, you’ll hear the feedback that’s
typical of a guitar amp played at high volume.
GAIA’s Amazing Eff ects!
The GAIA SH-01 contains fi ve eff ects processors: distortion (DIST), modula-
tion (FLANGER), delay (DELAY), reverb (REVERB), and low boost (LOW
BOOST). Using the DIST or FUZZ eff ects located in the leftmost column will
distort the sound, making it more aggressive. DELAY and REVERB let you
create lush, spacious sounds. Go ahead and try out various eff ects to hear
what they do.
Press the [DIST] button
so its light goes out
A NOTE OF
ADVICE