Installation, Wiring diagram aeration adjustment – Regency Horizon HZ54 User Manual

Page 30

Text mode
Original mode

HZ54 Regency Horizon

Gas Fireplace

INST

ALLA

TION

WIRING DIAGRAM

AERATION ADJUSTMENT

The burner aeration is factory set but may need
adjusting due to either the local gas supply or
altitude. Open the air shutter for a blue fl ame or
close for a more yellow fl ame.

Minimum Air Shutter Opening:

NG 1/2"
LP 1/2"

CAUTION: Label all wires prior to disconnection
when servicing controls. Wiring errors can cause
improper and dangerous operation.

Caution: Ensure that the wires do not touch any
hot surfaces and are away from sharp edges.

CAUTION: Carbon will be produced if air shutter

is tightly closed.

Note: Any damage due to carboning

resulting from improperly setting
the aeration controls is NOT covered
under warranty.

INSTALLATION