RCA RD2312 - Manual (Page 8)

EN EN
5
Before You Begin
Insert battery into the
player
1. To remove the battery door, gently
press on the battery compartment and
slide it in the direction of the engraved
arrow.
2. Lift up the battery compartment.
3. Insert a “AAA”(UM4) battery with
polarities corresponding to the
indications on the compartment.
4. Place the battery compartment to the
original position.
Note
Refer to the power level indicator on
display for battery level.
Replace with new batteries when the
indicator is empty. Refer to “Display
Overview” on page 11.
Before You Begin
6
Important Battery
Information
• When storing the unit , be sure to
remove the batteries because they
may leak and damage the unit.
• Batteries may leak electrolyte if
inserted incorrectly, if disposed of in
fire, or if an attempt is made to charge
a battery not intended to be
recharged.
• Never mix new batteries with old ones.
Do not mix battery types.
• Discard leaky batteries immediately.
Leaking batteries may cause skin burns
or other personal injury.
• Do not charge batteries which are not
intended to be recharged.
• Dispose of batteries, according to
federal, state and local regulations.
Please Respect the
Environment!
Before throwing any
batteries away, consult
your distributor who may
be able to take them back
for specific recycling.
Headset Safety
Have a Blast- Just Not in Your Eardrums
Make sure you turn down
the volume on the unit
before you put on
headphones. Increase the
volume to the desired level
only after headphone are
in place.
• Do not play your headset at a high
volume. Hearing experts warn
against extended high-volume play.
• If you experience a ringing in your
ears, reduce volume or discontinue
use.
• You should use extreme caution or
temporarily discontinue use in
potentially hazardous situations.
Even if your headset is an open-air
type designed to let you hear outside
sounds, don’t turn up the volume so
high that you are unable to hear what
is around you.