Roland Portable Recorded R-26 - Manual (Page 91)

Connecting to Your Computer via USB
91
O
ver
vie
w
G
etting R
eady
Rec
or
ding
Pla
yback
File O
per
ation
Comput
er
A
ppendix
Listening to the Computer’s
Playback Through the R-26
Audio played back by your computer
can be heard via USB through the output
system connected to the R-26. This audio
can also be recorded by the R-26 itself.
1.
In the audio playback software on
your computer, switch the audio
output destination to the R-26 .
For details on switching the audio output
destination, refer to the manual for the
software you’re using.
Recording the playback on the R-26 itself
1.
Choose [MENU] Ú
SETUP> Ú (p . 31) .
2.
Choose .
Setting Description
TO PC
Signal from the R-26 being input
to the computer
FROM PC
Signal from the computer being
input to the R-26
Using Loop Back
The R-26’s Loop Back function allows
you to mix the R-26’s own input with
the sound being played back by your
computer software, and send this back to
the computer. You can use this to add a
narration to music that you’re playing back
and re-record it anew on your computer, or
to create streams for distribution.
1.
Touch AUDIO IF tab .
2.
Touch the to turn it
on/off .
3.
Touch the knob icon to adjust the
volume of the sound being played
back on your computer .
Touch to adjust the volume.