Roland Portable Recorded R-26 - Manual (Page 39)

Recording
39
O
ver
vie
w
G
etting R
eady
Rec
or
ding
Pla
yback
File O
per
ation
Comput
er
A
ppendix
Supplying phantom power
Here’s how to supply phantom power to the
mics connected to the ANALOG IN 1/L jack
and ANALOG IN 2/R jack.
1.
Choose [MENU] Ú
SETUP> Ú .
2.
Touch or
.
* If you’ve set LINK or MS mic as the input
type, all you need to do for phantom
power to be supplied is to make the
setting [INPUT1 PHANTOM].
3.
Touch .
* Always turn the phantom power off
when connecting any device other than
condenser microphones that require
phantom power to the XLR connector.
You risk causing damage if you
mistakenly supply phantom power to
dynamic microphones, audio playback
devices, or other devices that don’t
require such power. Be sure to check the
specifications of any microphone you
intend to use by referring to the manual
that came with it.
(This instrument’s phantom power: 48 V
DC, 10 mA Max)
4.
Touch twice to return to the
menu screen (p . 18) .
MS mic settings
Here’s how to adjust the MS mic’s stereo
width.
1.
Choose [MENU] Ú
SETUP> Ú .
2.
Touch .
“MS-MIC WIDTH” is located on page 2/2.
Touch
to access 2/2.
* The setting is shown
only if the input type is set to MS mic.