Nokia 282 - Manual (Page 18)

13 13 13 13
The Basics
Making a call
1 Extend the phone’s antenna fully.
2 Enter the area code (if needed) and the phone
number, then press SEND. If you make a
mistake dialing, press CLR to erase digits one
by one. Press and hold CLR or press END to
clear the whole display.
A phone symbol appears
on the display. The call is
connected when the
phone number disappears
from the display and CALL
appears.
For international calls: You can enter a ‘+’ at the
beginning of a number by pressing !!. Then enter
the country code and number, then press SEND.
The ‘+’ expands to the international dialing code
prefix.
To dial a number stored in the Phone Book:
From the Ready screen press
or until the
Phone Book entry is displayed, then press SEND.
To make an emergency call: See "Emergency
Calls" on page 75.
NO SERVICE appears and the phone beeps if you
try to make a call when your phone is outside the
cellular service area.
CALL NOT ALLOWED appears if you try to
make a call that is restricted (see “Allowed Calls
(Menu 5 1 2)” on page 45), or the phone is locked.
If you receive a call when you’re trying to make a
call, the incoming call comes through and the
outgoing call is cancelled.
NORMAL POSITION: Hold the phone as you would any
other telephone, with the antenna pointed up and over
your shoulder.
CALL