Eizo COLOR EDGE CG245W User Manual
Page 42
42
Chapter 7 Reference
●
To set input signal selection [Input Selection]
Setting
Function
Auto
The monitor recognizes the connector through which PC signals are input. When
a PC is turned off or enters the powersaving mode, the monitor automatically
displays another signal.
Manual
The monitor detects only the PC’s signals currently displaying automatically. Select
an active input signal with
.
Procedure
1. Choose
.
2. Choose <
Input Selection
> from the
.
The menu appears.
3. Select “Auto” or “Manual” with
or
.
4. Press
to exit the adjustment.
Attention
• When “Auto” is selected for , the monitor’s power-saving function works only when the all PCs
are in the power-saving mode.