Eizo COLOR EDGE CG245W - Manual (Page 23)

23
Chapter 2 Adjusting Screen
●
To adjust the gamma value [Gamma]
The gamma value can be adjusted. The luminance of the monitor varies depending on the input signal,
however, the variation rate is not proportional to the input signal. To keep the balance between the input
signal and the luminance of the monitor is called as “Gamma correction”.
Adjustable range: 1.6-2.7 (0.1 unit)
Procedure
1. Choose from the Adjustment menu, and press
.
2. Choose from the menu, and press .
3. Adjust the gamma value with or .
4. Press to exit the adjustment.
NOTE
• The default setting for each Adobe ® RGB/sRGB/EBU/REC709/SMPTE-C/DCI mode is set to “Standard”, which is
the gamma in conformity with each standard.
●
To adjust the hue [Hue]
This function allows you to adjust the hue.
Adjustable range: -100 to 100
Procedure
1. Choose from the Adjustment menu, and press
.
2. Choose from the menu, and press .
3. Choose , and press .
4. Adjust the hue with or .
5. Press to exit the adjustment.
Attention
• This function does not enable to display every color gradation.
●
To adjust the color saturation [Saturation]
This function allows you to adjust the saturation of the color on the monitor.
Adjustable range: -100 to 100
Procedure
1. Choose from the Adjustment menu, and press
.
2. Choose from the menu, and press .
3. Choose , and press .
4. Adjust the saturation of the color with or .
5. Press to exit the adjustment.
Attention
• This function does not enable to display every color gradation.
NOTE
• Setting the minimum (-100) turns the image to a monochrome screen.