Eizo COLOR EDGE CG245W - Manual (Page 31)

31
Chapter 3 Setting Monitor
3-9. Restoring the Default Setting
There are two types of Reset. One is to reset the color adjustment only to the default settings, and the
other is to reset all the settings to the default settings.
Attention
• After resetting, you cannot undo the operation.
NOTE
• For main default settings, refer to “Main default settings (factory settings)” on page 46 .
●
To reset color adjustment values [Color Reset]
Only the adjustment values in the current mode will revert to the default settings (factory settings).
Procedure
1. Choose from the Adjustment menu, and press
.
2. Choose from the menu and press .
3. Select “Execute” with or .
4. Press .
The color adjustment values revert to the default settings.
●
To reset all adjustments to the factory default settings [All Reset]
Reset all adjustments to the factory default settings.
Procedure
1. Choose from the Adjustment menu, and press
.
2. Choose from the menu, and press .
3. Select “Execute” with or .
4. Press .
All setting values revert to the default settings.
NOTE
• The settings done through the clock settings and the optional settings menu in the SelfCalbration menu are not
returned to the default.