Eizo COLOR EDGE CG245W - Manual (Page 34)

34
Chapter 4 SelfCalibration
●
Setting the monitor date and time [Clock Adjustment]
Set the monitor date and time.
NOTE
• When ColorNavigator is started, the date and time are automatically set. Refer to the ColorNavigator User’s
Manual on the CD-ROM.
Procedure
1. Choose from the SelfCalibration menu, and press
.
2. Choose from the Setting menu, and press .
The Clock Adjustment menu appears.
3. Select the date using or , and then press .
4. Select the time using or , and then press .
The date and time for the monitor are set.
Attention
• If the main power supply is disconnected for an extended period of time, the clock may need resetting.