NEC MAGICOLOR 6110 - Manual (Page 42)

Media 40
Labels
Input Tray Upper media tray only
Capacity Up to 50 sheets, depending on the thickness of
the labels
Orientation Face up
Type „ Use only labels recommended for laser printers, such as
– Avery 5260
Weight 24–42 lb (90–157 g/m²)
Print Mode
to Select Thick stock
Duplexing Not supported
Notes „ Avoid using labels with exposed adhesive; it may stick to
internal printer parts, causing labels to peel off and media
jams to occur.
„ Adhesive label stock is supported only in letter or A4
sheets.
„
A label consists of a face sheet (the printing surface),
adhesive, and a carrier sheet
– The adhesive and carrier sheet must withstand the fus-
ing temperature (392° F/200° C).
– The face sheet must follow the plain paper specifica-
tions on “Media Storage and Handling” on page 30.
– The face sheet surface must cover the entire carrier
sheet, and no adhesive should come through on the
surface.
„
You can print continuously with label paper. However, this
could affect the media feed, depending on the media qual-
ity and printing environment. If problems occur, stop the
continuous print and print one sheet at a time.