NEC MAGICOLOR 6110 User Manual
Page 136
Lower Feeder Unit (LFU)
134
1
Remove the fuser oil bottle.
Attention
Hold a sheet of paper under
the oil bottle as you remove
it, so no oil drips into the
printer.
2
Turn the nozzle on the opening on the bottom
clockwise to close it. Place the oil bottle (nozzle
up) in an oil-proof container such as a plastic bag,
until you’re ready to reinstall it.
3
Use the fuser oil remover syringe that came with
your printer or an eye-dropper to remove any
excess oil from the printer.
5"
Dispose of the oil in accordance with local safety laws and
regulations.
4
Remove the LFU from the shipping carton, and place it on a table or flat
surface near the printer.
5
Remove any tape and packing material from the LFU.
5"
We strongly suggest that you save the packaging materials in
case you ever need to move or ship the printer.
6
Position the LFU cable
connector away from the
rear of the LFU.
Nozzle