NEC MAGICOLOR 6110 - Manual (Page 179)

Repack the Printer 177
4
Weave the slack of
one end through
the buckle.
5
Pull the slack on
that end so that the
strapping is taut in
the buckle.
6
Weave the slack of
the other end through the buckle.
7
Pull all of the
remaining slack
of the strapping
through this side
of the buckle,
until the buckle is
taut against the printer box.
8
Pull the buckle against the printer as tightly as possible.
Some slack may still exist.
9
Repeat this procedure
three more times, spacing
the straps equidistant
across the box.
10
Write the RMA number
prominently on the carton.
RMA #