NEC MAGICOLOR 6110 - Manual (Page 32)

Introduction 30
Introduction
This chapter provides information on handling, selecting, and storing media.
Media Storage and Handling
How do I store media?
When storing media, avoid
„
Direct sunlight
„
Excess heat and humidity
„
Dust
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place on a level surface.
Before purchasing a large quantity or special media, do a trial printing with
the same media and check print quality.
What should I watch out for when handling/loading media?
Attention
Do not use the media types listed below. These could cause poor print
quality, media jams, or damage to the printer.
Do not use media that is
„
Meant for ink jet printers
„
Folded, embossed, warped, or wrinkled
„
Perforated or prepunched
„
Too slick, too coarse
„
Composed of foil or gilt
„
Coated with a processed surface (such as carbon paper, heat-sensitive
paper, heat-pressure paper)
„
Irregularly shaped (not rectangular); not uniform in size
„
Bound with glue, tape, or paper clips
„
Attached to ribbons, hooks, buttons, etc.
„
Any other media that is not approved