NEC MAGICOLOR 6110 - Manual (Page 176)

Repack the Printer 174
Repack the Printer
If you need replacement packaging, i n the United States, call MINOLTA-QMS
Spares at (251) 633-4300 extension 2530 and request catalog number
2600439-500. In locations outside the United States, refer to the Service &
Support Guide or www.minolta-qms.com.
Before packing the printer and strapping it to a pallet, verify that the actions
described in the following list have been completed in this order.
Checklist
9
Item Should
be... Additional actions
RMA number Received Before shipping, place the
RMA number prominently
on the outside of the box.
Repacking kit, pallet, strap-
ping and buckling supplies Acquired, if
necessary
OPC belt cartridge Installed
Cables Removed
Media tray(s) Removed
Toner cartridges Removed
Fuser oil bottle Removed Fuser oil remover syringe
used to remove the oil, and
paper towels inserted to
absorb any residual oil
Cleaning roller Removed
Fuser tension release levers In forward
position
Waste toner bottle Replaced New waste toner bottle
installed
Duplex unit Removed
Lower feeder unit(s) Removed
Printer Bagged