Configure area code set-up – Nortel Networks 2004 User Manual

Page 47

Configure options on the IP Phone 2004

Configure Area Code set-up

The Area Code set-up menu enables a user to save up to 3 area codes.
When an incoming call arrives with an area code that matches one of the
3 stored area codes, the incoming call number is re-ordered to display the
telephone number followed by the area code (as opposed to the area
code followed by the telephone number).

This re-ordering is also performed when a user scrolls through their
Callers List. To configure the area code, press the

Services

key and

select

Call Log Option

from the

Telephone Option

menu.

To configure default area codes (3 maximum):

4. Choose one of the following:

— Press the

Select

soft key to save the

configuration.

— Press the

Cancel

soft key to keep

existing configurations.

1. Press the

Up/Down

navigation keys to

scroll and highlight

Area Code Setup

2. Press the

Select

soft key.

3. Press the

Up/Down

navigation keys to

scroll and highlight one of the following:

— Area Code # 1

— Area Code # 2

— Area Code # 3