Nortel Networks 2004 - Manual (Page 113)

Additional features
113
Redial List
The Redial List feature logs all outgoing calls. Redial List can stored up to
20 entries in the list. When the list is full, the system over-writes the oldest
entry, Use the Redial List feature to review calls made, and to redial
previously dialed calls. The Redial List contains:
• the last and first names of the dialed party (if available)
• the DN of the dialed party
• the time/date of the last dialed occurrence
Entries in the Redial List are sorted by the time the call was received.
Note: Calling Party Name Display (CPND) is affected depending on
the preferred name match option. If preferred name match is on, the
CPND appears according to your configurations. If the preferred
name match option is off, the CPND appears according to the system
configurations.
To access Redial List, press the Directory key and select Redial List.
Note: If password control has been enabled, enter your SCPW at the
prompt.
To dial an entry:
1. Press the Up/Down navigation keys to
scroll and highlight the desired entry.
2. Press the Dial soft key.