Appendix a - specifications – Navman 5505 User Manual
Page 60
TRACKER 5505/5505i/5605 Installation and Operation Manual
60
NAVMAN
GENERAL
Size:
TRACKER 5505/5505i:
150mm H x 164mm W x 65mm D
(5.9” x 6.5” x 2.6”)
TRACKER 5605:
179.5mm H x 195mm W x 54mm D
(7.1” x 7.6” x 2.1”)
Display:
TRACKER 5505, 5505i: 5” diagonal, TFT
colour, 234 x 320 pixels
TRACKER 5605:6.4” diagonal, TFT colour,
234 x 320 pixels
Backlight: Display and keys
Supply voltage
10.5 to 32 V DC.
Supply current: at 13.8 V
300 mA min - no backlighting
550 mA max - full backlighting
External beeper or light output: Switched to
ground to sound alarm, 30 V DC, 200 mA
maximum.
Operating temperature
0° to 50°C (32° to 122°F)
ALARMS:
User set: Arrival radius, anchor, XTE, danger,
low fuel (optional), loss of DGPS fix
Fixed: Loss of GPS fix
GPS NAVIGATION
Chart card: C-MAP™ NT-MAX, NT+ or NT
User card: 3.3 V C-MAP™
Waypoints: Up to 3000, with default or
user-defined alphanumeric names up to
eight characters.
Routes: 25 Routes, with up to 50 points each
Tracks: By time or distance, one track of 2000
points and four of 500 points.
Chart datums
121 Chart datums (see next page)
One user-defined map shift.
Chart scale: 0.05 to 4096 nm for chart (chart
dependent) down to 0.01 nm in plotter mode.
COMMUNICATIONS
NavBus
Connection to other NAVMAN instruments.
NMEA
NMEA 0183 ver 2 4800 baud
• Inputs from compatible instruments: DBT,
DPT (preferred), GGA, GLL, GSA, GSV, MTW,
MWV, RMC, VHW, VTG
Outputs, for compatible instruments: APA,
APB, BWR, GGA, GLL, GSA, GSV, RMB, RMC,
VTG, XTE
STANDARDS COMPLIANCE
EMC:
USA: FCC Part 15 Class B.
Europe: (CE) EN301843-1:2004-06.
New Zealand and Australia: (C Tick)
EN60945 9.2 & 9.3.
Environment: IPx6/IPx7/CFR46 (with card
holder and connections in place).
Appendix A - Specifications