Navman 5505 - Manual (Page 30)

TRACKER 5505/5505i/5605 Installation and Operation Manual 30 NAVMAN
Changing the Gauges display
1 Go to the Gauges display and press .
2 To select the gauge type.
i Select
Gauge type.
ii Select Analog (round) or Digital
(numbers).
3 To change the data displayed:
i Select
Gauge setup.
ii Change a gauge:
a) Press the cursor keys to highlight the
gauge.
b) Press to display a menu of data
items.
c) Select a data item that is available on
your system.
iii Repeat the above step to set the other
gauges. Press .
4 Press to return to the Gauges display.
9 Data display
The data display has large numeric data fields.
To go to the data display, press
, select
Other, then select Data.
To select what data is displayed:
1 Press
and select Data setup.
2 Change a data field:
i Press the cursor keys to highlight the
field.
ii Press to display a menu of data
items.
iii Select a data item that is available on
your system or select
None
to leave
the field empty.
3 Repeat the above step to set the other data
fields.
4 Press .