Navman 5505 - Manual (Page 48)

TRACKER 5505/5505i/5605 Installation and Operation Manual 48 NAVMAN
14-5 Setup > Track
Press one or more times until the
Setup menu is displayed, then select Track:
Tracking records and displays the boat’s course
on the chart (see section 3-5). Five different
tracks can be recorded: track 1 has up to 2000
points and tracks 2, 3, 4 and 5 have up to 500
points each.
Record
Off: The TRACKER stops recording a track.
1
to
5
(select a track number): The TRACKER
starts recording the boat’s course into the
selected track.
Display
Off: No track is shown on the chart.
1 to 5 (select a track number): The
selected track is shown on the chart.
Plotting Interval
The options are Distance or
Time.
Distance
Select the distance plotting interval: 0.01, 0.05,
0.1, 0.5, 1.0, 2.0, 5.0 or 10.0 distance units.
Time
Select the time plotting interval: 1, 5, 10 or 30
seconds or 1 minute.
Memory used
The percentage of memory used in the track
being recorded.
Tip: Use the user card display to check the
number of points recorded in each track (see
section 12).
Send track
This option is included for compatibility with
older units. For information, see your NAVMAN
dealer.
Delete track
The data in the track selected for Record (see
above) is deleted.
Max fuel flow
The maximum fuel flow from a fuel tank to be displayed on an analog fuel flow gauge (see section 8)
Max RPM
The maximum engine RPM to be displayed on an analog RPM gauge. Required only if Navman
diesel flow sensors are installed. Enter the maximum RPM you know you can achieve for the engine
rather than the maker’s value (see section 8)