beautypg.com

NEC LT260 User Manual

Page 98

background image

E-98

USING ON-SCREEN MENU

Ͼ

Menu Descriptions & Functions

[Page 3]

Selecting Signal Format [Signal Select]

RGB1/2:

Allows you to choose "RGB" for an RGB source such as a com-

puter, or "Component" for a component video source such as a DVD

player. Normally select "RGB/Component" and the projector auto-

matically detects an either incoming signal. However there may be

some component signals that the projector is unable to detect. If

this is the case, select "Component". Select "Scart" in RGB 1 for the

European Scart.

VIDEO and S-VIDEO:

This feature enables you to select composite video standards manu-

ally. Normally select "Auto". Select the video standard from the pull-

down menu. This must be done for Video and S-Video separately.

[Page 4]

Enabling Auto Adjust [Auto Adjust]:

When "Auto Adjust" is set to "On", the projector automatically deter-

mines the best resolution for the current RGB input signal to project

an image using NEC's Advanced AccuBlend Intelligent Pixel Blend-

ing Technology.

The image can be automatically adjusted for position and stability;

"Horizontal Position", "Vertical Position", "Clock", "Phase", and

"Resolution".

On .............. Automatically adjusts image "Horizontal Position", "Ver-

tical Position", "Clock", "Phase" and "Resolution".

Off .............. User can adjust the image display functions ("Horizon-

tal Position", "Vertical Position", "Clock", "Phase" and

"Resolution") manually.