Connecting an external monitor – NEC LT260 User Manual

Page 32

E-32

INSTALLATION AND CONNECTIONS

Making Connections

RGB OUT

Connecting an External Monitor

You can connect a separate, external monitor to your projector to simulta-

neously view on a monitor the RGB analog image you're projecting. To do

so:

1. Turn off the power to your projector, monitor and computer.

2. Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D-Sub

15 pin) connector on your projector.

3. Turn on the projector, monitor and the computer.

NOTE: The RGB OUT connector outputs RGB signal during idle mode (See page

E-100). When the projector goes into idle mode, the image on an external monitor

disappears for a moment. Note that the RGB OUT connector will not output RGB

signal during Standby mode.

• Daisy chain connection is not possible.