Direction for inserting the pc card, Pc card type – NEC LT260 User Manual

Page 64

E-64

Removing the PC Card

Press the eject button. The PC card pops out a little. Grasp the edges

of the PC card and pull it out.

NOTE: Do not eject the PC card while its data is being accessed.

USING THE VIEWER

Direction for Inserting the PC Card

The PC card has a top and bottom and must be inserted into the PC card

slot in a specific direction. It cannot be inserted backwards or upside-down.

Attempting to force it into the slot in the wrong direction may break the

internal pin and damage the card slot. Refer to the PC card's operating

instructions for the proper direction of insertion.

PC Card Type

The PC Card slot accepts PCMCIA Type II only.

CAUTION: Do not use CompactFlash type cards except for flash memory

cards. Using a CompactFlash card with the help of a PC card adapter

could cause damage to the CompactFlash card.

Eject button