NEC LT260 - Manual (Page 117)

E-117
NOTE: The progress indicator shows the percentage of remaining bulb life. The
value informs you of the amount of lamp and projector usage respectively.
Remaining Lamp Time Display:
When the remaining lamp time reaches 0, the Remaining Lamp Time
bar indicator changes from 0% to 100 Hours and starts counting down.
If the remaining lamp time reaches 0 hours, the projector will not turn
on regardless of whether the lamp mode is set to Normal or Eco.
Returning to Factory Default
The Factory Default feature allows you to change adjustments and setting
to the factory preset for source except the following:
All Data ........... Reset all the adjustments and settings for all the sig-
nals to the factory preset except Remaining Lamp Time,
Lamp Hour Meter, Projector Usage, Language, Back-
ground, Entry List, Communication Speed, LAN Mode,
Security and Password. (To reset the lamp usage time,
see “Clear Lamp Hour Meter” on page E-100)
Current Signal . Resets the adjustments for the current signal to the
factory preset levels.
All the items in "Picture", "Volume", "Image Options"
and "Picture Management" can be reset.
USING ON-SCREEN MENU
Ͼ
Menu Descriptions & Functions