7. paper empty, 8. paper take-up roll assy, 9. registration roller – NEC 2060 User Manual
Page 49: Empty, Paper take-up roll, Roller
2-7. Paper Empty Sensor Assy.
Paper Take-up Roll Assy.
2.
Remove the
Cover.
to sect
3. Remove Paper Empty Sensor
(3
2
Note: After reinstallation, Secure the harness
in the wire saddle.
Take-up Roll Assy.
Transport Guide
sect.
3.
Remove
Paper Take-up Roll
(1 screw)
2-9. Registration Roller
2.
the Fusing
(Refer to
2-2)
the
Unit.
2-3)
4.
Remove the High Voltage Unit. (Refer to sect.
5.
the Paper Empty
to
sect.
6. Remove the Paper
Plate. (1 screws)
Note: Move the printer Left Frame in the
direction of the arrow to unlock the
from
the
7.
the Paper
Roller Unit. (1
Note:
the unit in the direction of
arrow
to unlock it from the tight drive unit of the
printer.
D-8