Nokia 5210 - Manual (Page 89)

©2002 Nokia Corporation. All rights reserved.
Me
n
u
fu
ncti
o
n
s
89
Me
n
u
fu
ncti
o
n
s ■ Making a connection to a WAP service
Firstly, make sure that the connection settings of the WAP service you want to use are activated.
To activate the settings:
1. Press Menu , select Services , and then Settings .
2. Scroll to Connection settings , select the appropriate settings group and press Options .
3. Select Activate .
Secondly, make a connection to the WAP service. Select one of the three options:
• Open the homepage of the WAP service:
Press Menu , select Services , and then Home .
Tip: In the standby mode you can quickly access the homepage of WAP service by pressing and
holding .
• Select a bookmark of the WAP service:
Press Menu , select Services , and then Bookmarks . Scroll to the bookmark you want to use and press
Options . Select Go to .
If the bookmark does not work with the current active service settings, Check service settings is
displayed. Activate another set of connection settings and try again. Or:
• Key in the address of the WAP service:
Press Menu , select Services , and then Go to address . Key in the address (press for special
characters) of the WAP service and press OK .
Note that it is not necessary to add the prefix in front of the address, such as http://, since it will be
added automatically. If you are using a protocol other than http, add the appropriate prefix.