NETGEAR CA 95054 - Manual (Page 10)

NETGEAR Router Setup Manual
2-2 Getting to Know Your NETGEAR Wireless Router
August 2004
The Front Panel
The front panel of the router includes these status lights.
Figure 2-1: router Front Panel
You can use the status lights to verify connections. Viewed from left to right, the table below
describes the lights on the front panel of the router.
Table 2-1. Status Light Descriptions
Label Activity Description
Power On Green Solid
Off Power is supplied to the router.
Power is not supplied to the router.
Test Blinking
Off The router is performing its diagnostic test.
The router successfully completed its diagnostic test.
Internet On
Blink
The Internet port has detected a link with an attached device.
Data is being transmitted or received by the Internet port.
LAN On (Green)
Blink (Green)
On (Yellow)
Blink (Yellow)
Off
The LAN (local area network) port has detected link with a 100 Mbps
device.
Data is being transmitted or received at 100 Mbps.
The Local port has detected link with a 10 Mbps device.
Data is being transmitted or received at 10 Mbps.
No link is detected on this port.