Nikon LS-30 - Manual (Page 6)

- 6 - Safety Precautions
• When handling the power and SCSI cables
Unplug the power cable by pulling on the plug, not on the
cable itself. Pulling directly on the cord could result in dam-
age that could cause fire or electric shock.
• When connecting or disconnecting the SCSI cable, handle
the cable by the connector. Do not pull on the cable itself.
MADE IN JAPAN
100098
SCSI
SCSI
SCSI NB
TERMINATOR OFF
O N
6 5 4 3 2 1 0 7
100098
SCSI
• Do not connect or disconnect the cables while the power is
on.
• Do not damage or modify the power or SCSI cables. Fire or
electric shock may result if the cables are placed under heavy
objects, exposed to heat or flame, or forcibly tugged or bent.
• Should the insulation of the cables become damaged and the
wires become exposed, contact your retailer or Nikon
service office for information on repair or replacement.
Continued use could cause fire or electric shock.
• Do not plug the power cord into an extension cord or multiple-
outlet extension, as this could result in fire or malfunction.
• Do not handle the cables when your hands are wet. Doing
so could cause electric shock.
* The shape of the cable may vary
depending on the country of sale.
* The shape of the cable
may vary depending on
the country of sale.