Eizo FlexScan L461 User Manual
Page 31
6. TROUBLESHOOTING
31
ENGLISH
Problems
Points to check with possible solutions
Leaving the screen white may solve the problem.
“Smoothing” is disabled in the following cases.
• 1280 x 1024 of resolution
• “Enlarged” mode in the “Screen Size” setting with the
1280 of horizontal resolution (i.e. 1280 x 960)
• “Normal” mode in the “Screen Size” setting.
Some Macintosh without PC-Exchange do not allow the
utility disk to be opened. Please set the desktop pattern to
every-other-dot before adjustment. (p.18)
The adjustment lock is probably on. To unlock: switch the
LCD monitor off. Then, while pressing the Auto
adjustment button, switch the power on. (p.16)
The Auto sizing function is intended for use on the
Macintosh and on AT-compatible PC running Windows.
It may not work properly in either of the following cases.
When running an AT-compatible PC on MS-DOS (Not
windows).
The background color for the “wall paper” or “desktop”
pattern is set to black.
Some signals from a graphics board may not function
properly.
Use the graphics board’s utility software to change the
input signal frequency.
12. The “Smoothing” can not
be selected.
14. • The Enter button does
not operate.
• The Auto adjustment
button does not operate.
15. The Auto adjustment
button does not work
properly.
13. The utility disk is unable
to be opened (for
Macintosh only).
16. Frequency does not
change after installing
“Monitor information
file” in the attached
utility disk on Windows
95/98/Me/2000.
11. Fingerprints remain on
the screen.