beautypg.com

2. connecting the signal cable – Eizo FlexScan L461 User Manual

Page 12

background image

12

2. CABLE CONNECTION

2-2. Connecting the signal cable

• Be sure that the power switches of both the PC and the monitor are OFF.

1.

Plug the signal cable into the DVI-I connector at the rear of the
monitor and the other end of the cable into the video connector on the
PC.

After connecting, secure the connection with the screw-in fasteners.

FD-C16 (enclosed)

Macintosh Adapter (Optional)

Video Output Connector
D-Sub mini 15 pin

Video Output Connector
D-Sub 15 pin

FD-C04 (Optional)

Video Output Connector
DVI

[Analog Input]

[Digital Input]

The L461 is not compatible with a Power Macintosh G4/G4 Cube ADC (Apple
Display Connector).

·Standard graphics board
·Macintosh G3 (Blue & White) / G4

Macintosh

Digital graphics board