Eizo FlexScan L461 - Manual (Page 19)

4. ADJUSTMENT
19
ENGLISH
3.
Adjust by using “Screen” menu in the ScreenManager.
(1) Vertical bars appear on the screen.
Ж Ж Ж Ж Ж Use the “Clock” p.35) adjustment
Select the “Clock” and eliminate the vertical bars by using the right and left of
the control buttons. Do not continuously press the control buttons, as the
adjustment value will change quickly and make it difficult to locate the most
suitable adjustment point.
If the horizontal flickering, blur or bars appear, proceed to “Phase” adjustment
as follows.
• When adjusting the “Clock,” the horizontal screen size will also change.
(2) Horizontal flickering, blurring or bars appear on the screen.
Ж Ж Ж Ж Ж Use the “Phase” p.36) adjustment.
Select the “Phase” and eliminate the horizontal flickering, blurring or bars by
using the right and left buttons.
• Horizontal bars may not completely disappear from the screen depending on the
PC.