beautypg.com

NEC MultiSync LCD2335WXM User Manual

Page 32

background image

30

Symptoms


If the solution does not correct the symptoms, please contact your local Service center for assistance.

WARNING

DO NOT OPEN THE MONITOR.
Self servicing can be hazardous. There are no
user serviceable parts inside and opening or
removing covers may expose you to
dangerous shock hazards or other risks.
Refer all servicing to qualified personnel.

Symptom

Point to check

See Page

There is no picture and the power-indicating lamp
is off.

Check to see that the power cable is properly
connected.

Press the main switch.

11

The message “No cable connected” or “Going to
sleep” is displayed.

There is no picture and the power indicating lamp
lights orange.

No sync signal is detected.

Check that the signal cable is properly connected.

Make sure that the computer, imaging equipment,
etc., is turned on.

Make sure the computer is not in power-save mode.

Ensure that the input selection matches the
connection terminal.

The message “Invalid Mode.” is displayed.

An input signal is received abnormally.

Ensure that the input signal matches the monitor
specifications.

Check to see that the signal cable is properly
connected.

32

The power indicating lamp is lit normally but there
is no picture.

Check the contrast and brightness settings
(adjust them for higher contrast and brightness).

Check to see that the signal cable is properly
connected.

13

The display image appears slanted.

Text displayed across the screen appears
vertically streaked, with the characters in vertical
columns blurred.

Adjust the clock frequency and the phase.
(Adjust the clock frequency first, the dot clock
phase next.) (RGB input)

14

Text displayed across the screen appears blurred.
A fine pattern flickers when displayed on the
screen.

Adjust the clock phase till the desired clarity is
obtained.
(RGB input)

14

The remote control does not work.

Ensure that the batteries in the remote control are
inserted with the correct polarity.

Check to see that the batteries in the remote
control are functional.

5

T

TT

T

Trrrrroub

oub

oub

oub

ouble

le

le

le

lesho

sho

sho

sho

shoot

ot

ot

ot

oting

ing

ing

ing

ing

continued