NEC MultiSync LCD2335WXM User Manual

Page 24

Other Functions

The MTS button is used only when using the TV channel selector.

Stereo and SAP (2nd Audio program) sound program

When a bilingual program is received, the sound mode display appears as shown on the right.

Press the MTS button to select the sound to be heard.

Each time the button is pressed, Stereo, SAP or Mono appears on the screen.

CHANNEL:10 STEREO

CHANNEL:10 MONO

CHANNEL:10 SAP

Mono and SAP (2nd Audio program) sound program

When a program is received, the sound mode display will appear as shown on the right,
and you can press the MTS button to select between SAP and mono sound.

Each time the button is pressed, SAP or Mono will appear on the screen.

CHANNEL:10 SAP

CHANNEL:10 MONO

Monaural sound

When a monaural program is received, the sound mode display will be shown. You can press the MTS

button to manually select monaural Sound.

NOTES

If the sound signal is not strong enough, press the MTS button until Mono appears on the screen, to receive a clear mono sound.

If the sound has a hiss noise or keeps switching between stereo and mono mode or SAP and mono mode due to signal strength, press the MTS button until
Mono appears on the screen to receive a clear mono sound.

Stereo sound

When a stereo program is received, the sound mode display will be shown.

You can press the MTS button to select the sound mode for stereo or mono reception.

PIP:RGB1 VGA

MAIN:TV1

CHANNEL:10 STEREO

CHANNEL:10 SAP

Ope

eerrrrrat

ating Ins

ing Ins

ing Instruc

truc

tructttttions

ions

continued

Note: Not all menus are available for every input source.