Nx Networks 3000 - Manual (Page 77)

3000 Series User Guide 63
Frame Relay
Your Frame Relay service provider gives you the information you need to set
up your 3000 Series for Frame Relay.
For configurations where you are running IPX or bridging over Frame Relay
or using multiple Permanent Virtual Circuits (PVCs), N
x
Networks
recommends that you read the Frame Relay documentation in the Online
Library available on the N
x
Networks Web site at www.nxnetworks.com or on
the CD that comes with your 3000 Series.
What type of Local Management Interface
(LMI) does your Frame Relay switch use?
The 3000 Series supports REV1, ANSI, and
CCITT. The default is ANSI. Most providers
use REV1 or ANSI.
_____________
Use Frame Relay LAN Emulation
(FRLANE)?
N
x
Networks recommends that you answer
No to this question and instead use Frame
Relay Virtual Circuit (FRVC) unless you are
using more than one PVC. If you use
FRLANE, refer to the documentation
mentioned above.
_____ Yes _____ No
Circuit Name (1-23 characters) _______________________