Connecting to a t1 network, Connecting to an sdsl network, Fractional t1 module – Nx Networks 3000 User Manual
Page 28: Sdsl module, Sdsl network, T1 network
Connecting Your 3000 Series Secure Gateway Router
14
3000 Series User Guide
Connecting to a T1 Network
To connect to a T1 network,
1. Connect one end of the unshielded twisted pair (UTP) RJ-48C cable to the
T1 connector on the T1 DSU/CSU module.
2. Connect the other end of the cable to an RJ-48C network interface jack
provided by your service provider.
Connecting to an SDSL Network
To connect to a Digital Subscriber Loop Access Multiplexor (DSLAM),
1. Connect one end of the unshielded twisted pair (UTP) RJ-48C cable to the
connector on the SDSL module.
2. Connect the other end of the cable to an RJ-48C network interface jack
provided by your service provider.
3000 Series
RJ-48C
Jack
3000 Series
VOIC
E
OICE
V1
V1
D1
D1
D2
D2
D3
D3
ETH
ETH
V2
V2
V3
V3
V4
V4
DATA
ALM
ALM
OK
OK
PWR
PWR
T1
3000 Series
RJ-45
Jack
3000 Series
VOIC
E
OICE
V1
V1
D1
D1
D2
D2
D3
D3
ETH
ETH
V2
V2
V3
V3
V4
V4
DATA
ALM
ALM
OK
OK
PWR
PWR
DSLAM