Nx Networks 3000 - Manual (Page 75)

3000 Series User Guide 61
IP Addressing, continued
I am using (choose at least one)
Notes:
• If you are using a default gateway
that is connected to the 3000 Series
over the WAN device, and you are
using unnumbered IP, set the
default gateway to 0.0.0.1.
• If you are using static routes, you
need the destination network
address, its subnet mask, the IP
address of the next hop router, and
the number of hops to that router
(gateway).
• Not all versions of N
x
Networks
software support OSPF.
(a) _____ RIP
(b) _____ Default gateway of
_____._____._____._____
(c) _____ Static route to
____.____.____.____
Address mask
____.____.____.____
Via gateway
____.____.____.____
Number of hops to gateway
_____
(d) _____ OSPF
Area ____.____.____.____
Authentication Type ____
(1 = a password; 0 = none)
Stub Area ____ Yes ____ No