N-Tron Ntron 7014FX2 - Manual (Page 106)

6/28/2007 page 106 of 145
Set Name of the Remote File
Command Name ftp set remotefile
Description To set the name of the remote file which has to be retrieved from the
FTP server
Syntax ftp set remotefile
Parameters Remote-file-name
Name of the file to retrieved from the FTP server including the
complete path
Example eg.1
N-TRON/Admin#[1]> ftp set remotefile Flash
eg.2
N-TRON/Admin#[1]> ftp set remotefile /usr/local/ftp/flash
Notes The file name (including the complete path) should be a valid name else
retrieval of the file would fail.
Display FTP related configuration parameters
Command Name ftp show
Description To display the present value of all the FTP related configuration
parameters
Syntax ftp show
Parameters None
Example N-TRON/Admin#[1]> ftp show
Notes
Perform the configuration file transfer action
Command Name ftp config
Description To perform the desired File Transfer action (either get or put). Get
retrieves a remote file from the FTP server and put stores a local file at
the FTP server
Syntax ftp get config
ftp put config
Parameters Action-command
The desired File transfer action (either get or put)
Example eg.1
N-TRON/Admin#[1]> ftp get config
eg.2
N-TRON/Admin#[1]> ftp put config
Notes The action name should be either get or put
Perform the image file transfer action
Command Name ftp get image
Description To perform the desired File Transfer action. Get retrieves a remote file
from the FTP server
Syntax ftp get image
Parameters None
Example N-TRON/Admin#[1]> ftp get image
Notes Can only get an image from a server