N-Tron Ntron 7014FX2 User Manual
Page 100
6/28/2007 page 100 of 145
Set System Location
Command Name
system set syslocation
Description
To set the location details of the system
Syntax
system set syslocation
Parameters
Location-of-the-system
The details of where the system is located
Example
N-TRON/Admin#[1]> system set syslocation “San Jose”
N-TRON/Admin#[2]> system set syslocation Hyderabad
Notes
Please ensure to use “ “ for supplying arguments with spaces
Get System Uptime
Command Name
system get sysuptime
Description
To get the uptime of the device.
Syntax
system get sysuptime
Parameters
None
Example
N-TRON/Admin#[1]> system get sysuptime
System Up Time : 9 days:17 hours:8 mins:40 secs
Notes
Get Number of Ports present in the System
Command Name
system get portcount
Description
To get the number of ports present in the device.
Syntax
system get portcount
Parameters
None
Example
N-TRON/Admin#[1]> system get portcount
Notes
Set IP Address of the SNMP Manager
Command Name
system set snmpmgmtip
Description
To set the IP address of the SNMP manager
Syntax
Usage: system set snmpmgmtip
Parameters
Station Number
1->5.
IP Address
The IP address of the SNMP manager in dotted decimal notation
Example
N-TRON/Admin#[1]> system set snmpmgmtip 10.1.5.100
N-TRON/Admin#[2]> system set snmpmgmtip 10.1.6.150
NOTES
The IP address should be a valid IP address (excluding Class D & Class
E type). To restore a Trap to “Value Not Configured”, enter ‘0.0.0.0’.
Set SNMP Get Community name
Command Name
system set snmpgetcommunity
Description
To set the community name for performing snmpget operation
Syntax
system set snmpgetcommunity
Parameters
Community-Name
The name of the community to be used for performing snmpget
operation
Example
N-TRON/Admin#[1]> system set snmpgetcommunity public
N-TRON/Admin#[1]> system set snmpgetcommunity “N-Tron
Systems”
Notes
Please ensure to use “ “ for supplying arguments with spaces