Assigning a directory entry to a feature key – Nortel Networks NN10300-009 User Manual
Page 30
30
Using the Feature menu
Step
Action
1
From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
2
Select a key to change.
The Feature submenu appears.
3
Select and open Assign.
If the key you selected in step 2 is assigned to a Centrex feature,
these soft key labels appear: Key Type and Autoscroll.
If the selected key is assigned to a local feature, these soft key
labels appear: Key Type and Feature.
4
Press Key Type.
The Key Type screen appears. A check mark appears beside
the type currently assigned to the key.
5
Perform one of these actions:
•
To change Central to Local, select Local.
•
To change Local to Central, select Central.
6
Press Ok.
The key type is changed and a check mark appears beside the
selection.
7
To assign a directory entry to a Local key, see
directory entry to a feature key” (page 30)
.
--End--
Assigning a directory entry to a feature key
Follow this procedure to assign a directory entry to a feature key.
Assigning a directory entry to a feature key gives you the ability to speed
dial that number when you press the key.
Prerequisites
The feature key you select must be defined as Local, see
Step
Action
1
From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
2
Select the key defined as Local.
The Assign menu appears.
Carrier VoIP
Nortel IP Phone 2004 User Guide (CICM)
NN10300-009
09.01
Standard
4 July 2008
Copyright © 2008 Nortel Networks
.