Nikon LS8000 - Manual (Page 54)

44
Confirming Device Registration (Windows Me)
After registering the scanner, confirm that the device is working normally as described below.
1 Turn the scanner on
Make sure that the scanner is connected and turned on.
2 Open the System Properties dialog
From the Start menu, select Settings > Control Panel and double-click the System
icon.
3 Display the Device Manager
The System Properties dialog will be dis-
played. Open the Device Manager tab.
4 Confirm that the scanner is listed under “Imaging Device”
If “Imaging Device” appears in the De-
vice Manager, click the “+” to its left to
view the imaging devices currently regis-
tered with Windows. Confirm that your
scanner is listed.
If the Scanner Is Not Listed
If your scanner is not listed under “Imag-
ing Device,” proceed to “Updating the
Device Driver (Windows Me)” (
46).