Nortel Networks COMMUNICATION SERVER 1000 NN43021-110 - Manual (Page 27)

System modules 27
Figure 8
NT5D21 Core/Network module
NT8D35 Network module
This module provides the network switching functions in the Meridian 1
Option 81C, Meridian 1 PBX 81C CP PIV, and CS 1000M MG.
Two Network modules are required to make a full network group of 32
loops. A maximum of 16 Network modules (eight network groups) can be
configured in the Meridian 1 Option 81C, CS 1000M MG, and Meridian
1 PBX 81C CP PIV.
The Network module houses up to four NT8D04 Superloop Network
Cards, for a total of 16 network loops. Superloop network cards are
cabled to the backplane of an IPE module. In a typical configuration, one
Conference/TDS card is configured in the module, leaving 14 voice/data
loops available. In CS 1000M MGand Meridian 1 PBX 81C CP PIV, the
Conference/TDS cards are located in the Core/Network module. The Clock
Controller must be installed in slot 13.
Figure 9 "NT8D35 Network module" (page 28) shows the cards housed in
the module.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Large System Overview
NN43021-110 02.05 Standard
30 September 2008
Copyright © 2003-2008 Nortel Networks
.