Napoleon Fireplaces PARK AVENUE GD82PT - Manual (Page 3)

3
W415-0536 / B / 07.20.06
PG2-6 INTRODUCTION
Warnings and Safety Precautions
Warranty
Dimensions
General Instructions
General Information
Care of Glass & Plated Parts
6-10 VENTING
Vent lengths
Venting Specifi cations
Air Terminal Locations
11-16 INSTALLATION/FRAMING
Wall & Ceiling Protection
Using Flexible Vent Components
Fireplace Vent Connection
Using Rigid Vent Components
Gas Installation
Restricting Vertical Vents
Framing
Clearance to Combustibles
Mantle Clearances and Enclosures
16 ELECTRICAL CONNECTION
Hard Wiring Connections
Schematic
17 FINISHING
Door Removal
Log Shipping Bracket
Log Placement
Glowing Embers
18 BLOWER REPLACEMENT
Night Light Replacement
19 DECORATIVE BRICK PANEL
INSTALLATION
20 AFK / WI FACE KIT
INSTALLATION
21 REMOTE AND VALVE ACCESS
Burner Assembly Removal
22-27 OPERATION / MAINTENANCE
Fireplace Operation
Hand Held Remote Operation
Operating Instructions
27 ADJUSTMENTS
Pilot Burner Adjustment
Venturi Adjustment
28-29 REPLACEMENTS
Ordering Replacement Parts
Replacement Parts
Terminal Kits
Vent Kits
Accessories
20-31 TROUBLE SHOOTING GUIDE
WARNING
• Do not burn wood or other materials in this fi replace.
• Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to
avoid burns or clothing ignition. Keep young children and animals away when the fi replace is hot.
• Due to high temperatures, the fi replace should be located out of traffi c and away from furniture and draperies.
• Clothing or other fl ammable material should not be placed on or near the fi replace.
• Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace.
• It is imperative that the control compartments, burners and circulating blower and its passageway in the fi replace and
venting system are kept clean. The fi replace and its venting system should be inspected before use and at least annu-
ally by a qualifi ed service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding
material, etc. The fi replace area must be kept clear and free from combustible materials, gasoline and other fl ammable
vapours and liquids.
• Under no circumstances should this fi replace be modifi ed.
• This fi replace must not be connected to a chimney fl ue pipe serving a separate solid fuel burning appliance.
• Do not use this fi replace if any part has been under water. Immediately call a qualifi ed service technician to inspect the
fi replace and to replace any part of the control system and any gas control which has been under water.
• Do not operate the fi replace with the glass door removed, cracked or broken. Replacement of the glass should be done
by a licensed or qualifi ed service person.
• Do not strike or slam shut the fi replace glass door.
• This fi replace uses and requires a fast acting thermocouple. Replace only with a fast acting thermocouple supplied by
Wolf Steel Ltd.
NOTE: CHANGES, OTHER THAN EDITORIAL, ARE DENOTED BY A VERTICAL LINE IN THE MARGIN.
TABLE of CONTENTS
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE