Nortel Networks 2212 - Manual (Page 28)

28 Chapter 2 WLAN Handsets overview
NN40050-101 NN40050-101
To silence the ringer using the Function menu
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Ring Options .
3 Press the Select button (or OK) to select Ring Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring .
5 Press the Select button (or OK) to select Telephone Ring .
6 Press the Up and Down buttons to scroll through the menu and highlight Ring Cadence .
7 Press the Select button (or OK) to select Ring Cadence .
8 Press the Up and Down buttons to scroll through the menu and highlight Off .
9 Press the Select button (or OK) to select Off .
10 Press the Select button (or OK) to select the setting.
11 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
Lock and unlock the keypad
When the automatic keypad locking is enabled, the keypad will lock after the configured number
of seconds with no key presses (see
“To select the Keypad Autolock” on page 19 ). You can also
lock the keypad before the delay, using “To lock the keypad” on page 28 .
To unlock the locked keypad, follow “To unlock the keypad” on page 28 .
To lock the keypad
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Lock Keys .
3 Press the Select button (or OK ) to select Lock Keys .
The keypad is locked immediately.
To unlock the keypad
1 Press when the handset is in the standby state.
2 Press the key.
The keypad is unlocked immediately.