Nortel Networks 2212 - Manual (Page 20)

20 Chapter 2 WLAN Handsets overview
NN40050-101 NN40050-101
6 Do one of the following:
• Press UP to return to the previous menu and configure another option.
• Press to exit all menus and return to the standby state.
You can also press Exit from the top-level menu to exit the menu and return to the active
(off-hook) state.
Ring Options
The Ring Options enables you to configure the WLAN Handset ring tone for the three different
ringer types:
Telephone Ring , Auxiliary 1 , and Auxiliary 2 .
Telephone Ring allows further configuration for:
• Ring Cadence — controls the ringing rhythm.
• Ring Tone — controls the ringing tone (see note 1).
• Ring Volume — controls the ringing volume.
• Vibrate Cadence — controls the vibration rhythm.
• Ring Delay — controls how long the vibrate cadence plays before the audible ring starts (see
note 2).
To select the Ring Cadence
1 Press when the handset is in the standby state.
2 Press the Up and Down buttons to scroll through the menu and highlight Ring Options .
3 Press the Select button (or OK ) to select Ring Options .
4 Press the Up and Down buttons to scroll through the menu and highlight Telephone Ring .
5 Press the Select button (or OK ) to select Telephone Ring .
6 Press the Up and Down buttons to scroll through the menu and highlight Ring Cadence .
7 Press the Select button (or OK ) to select Ring Cadence .
Note: Auxiliary 1 and Auxiliary 2 are reserved for future use.
Note: Ring Tone is not displayed in the menu when Ring Cadence is turned off.
Note: Ring Delay is not displayed in the menu when Ring Cadence or Vibrate
Cadence is turned off.