NETGEAR MA311 - Manual (Page 15)

12
3. A list of devices installed in the system will be shown. Scroll down the list to locate the
NETGEAR MA311PCI Adapter entry. The PCI adapter entry should indicate that the MA311
PCI Adapter is started.
Installation of the MA311 PCI Adapter driver in Windows NT is complete. Continue now to the
section below, Installing Utility Software for Windows NT.
Important: The I/O Address and IPQ settings should be unique and not conflict with any
other device settings in your system. If there is a system resource conflict, please
check Windows NT Diagnosis and find a free I/O address and IRQ.
Installing Utility Software for Windows NT
1. While the MA311 Resource CD is still in the CD-ROM drive, run the setup.exe
program at the root of the CD.
2.
When the Welcome screen appears click Next.