NETGEAR KWGR614 User Manual

Page 61

54Mbps Wireless Router Model KWGR614 Reference Manual

Advanced Configuration of the Router

5-3

v1.2, September 2006

1. Click Add Service.

2. Enter a service name in the Service Name box.

3. In the Service User box, selecting the default value of Any allows the service to be used by

everyone in your network. Otherwise, to restrict the service to a particular PC, select Single
address and enter the PC’s IP address.

4. In the Service Type box, select between TCP (the default) and UDP.

5. In the Triggering Port box, enter the outbound port number that the application will use.

6. Set the parameters for the inbound connection—the connection type (TCP or UDP), the

starting port, and ending port numbers.

7. Click Apply to save your changes.

Figure 5-2

Note: For the information required for steps 4-6 above, refer to the game or

applications manual or support website.