NEC SIGMABLADE N8406-020 - Manual (Page 53)

- 53 -
4-3. Setting FC Switch Module
To use the FC Switch Module, the following information must be set.
„ Password,
„ Network (required),
„ Port data rate (required),
„ Port topology (required),
„ Domain ID,
„ Checking / Setting Principal Selection Mode
„ Zoning (required), and
„ Time and time server
„ See "Appendix Device Setting Features" for how to use the features.
CAUTION
Notes on settings
If one or more setting items required for the FC Switch Module are set
incorrectly, a system fault may occur. Before executing a job, you should be
familiar with its feature and influence sufficiently.