NEC SIGMABLADE N8406-020 - Manual (Page 143)

- 143 -
Deleting Time Server Setting
1. Type "tsclockserver" on the console screen.
„ Any commands used on the switch console should be specified with
lowercase letters.
2. Check the setting of the current time server.
HW060000951:admin> tsclockserver
192.168.1.1
HW060000951:admin>
„ The IP address of the time server being set appears.
3. Type "tsclockserver LOCL" on the console screen.
„ "LOCL" should be uppercase letters.
HW060000951:admin> tsclockserver LOCL
Updating Clock Server configuration...done.
HW060000951:admin>
4. Type "tsclockserver" on the console screen to confirm that "LOCL" appears.
HW060000955:admin> tsclockserver
LOCL
HW060000955:admin>
„ If the time server setting is deleted, "LOCL" appears.