beautypg.com

National Instruments PCI-4452 User Manual

Page 114

background image

Index

©

National Instruments Corporation

I-7

PCI-4451/4452 User Manual

analog I/O signal summary

(table), 4-4

digital I/O pin assignments

(table), 4-6 to 4-7

digital I/O signal summary

(table), 4-8

digital pin connections (figure), 4-5
exceeding maximum ratings

(warning), 4-1

power connections, 4-12
timing connections, 4-14 to 4-24

acquisition timing connections,

4-15 to 4-18

CONVERT* signal, 4-17
EXTSTROBE* signal, 4-18
PFI0/TRIG1 (EXT_TRIG)

signal, 4-16

PFI1/TRIG2 (PRETRIG)

signal, 4-17

typical posttriggered acquisition

(figure), 4-15

typical pretriggered acquisition

(figure), 4-16

general-purpose timing signal

connections, 4-19 to 4-24

FREQ_OUT signal, 4-24
GPCTR0_GATE signal, 4-20
GPCTR0_OUT signal, 4-20
GPCTR0_SOURCE signal, 4-19
GPCTR0_UP_DOWN signal,

4-20

GPCTR1_GATE signal,

4-21 to 4-22

GPCTR1_OUT signal, 4-22
GPCTR1_SOURCE signal, 4-21
GPCTR1_UP_DOWN signal,

4-22 to 4-24

programmable function input

connections, 4-14 to 4-15

waveform generation timing

connections, 4-18

UPDATE* signal, 4-18

WFTRIG signal, 4-18

types of signal sources, 4-10

floating, 4-10
ground-referenced, 4-10

software installation, 2-1
software programming choices, 1-3 to 1-4

ComponentWorks, 1-4
LabVIEW and LabWindows/CVI

application software, 1-3

Measure, 1-4
National Instruments application

software, 1-3 to 1-4

VirtualBench, 1-3

specifications

analog input, A-1 to A-5

amplifier characteristics, A-3 to A-4
channel characteristics, A-1 to A-2
dynamic characteristics, A-4 to A-5
transfer characteristics, A-2

analog output, A-5 to A-7

channel characteristics, A-5 to A-6
dynamic characteristics, A-7
transfer characteristics, A-6
voltage output, A-6

analog trigger, A-9
bus interface, A-9
calibration, A-10
digital I/O, A-7 to A-8
digital trigger, A-9
environment, A-10
onboard calibration reference, A-5
physical, A-10
power requirements, A-9 to A-10
timing I/O, A-8 to A-9

T

technical support, C-1 to C-2
telephone and fax support numbers, C-2
theory of operation. See analog operation

theory.

User.book Page 7 Tuesday, April 14, 1998 10:20 AM

This manual is related to the following products: