New Holland TG Series - Manual (Page 14)

14
PERFORMANCE ITEMS
High-Capacity Drawbar
A high-capacity drawbar option is available for applications where
heavy drawbar loads are expected. The high-capacity drawbar should
be used for applications like front folding planters, liquid manure
wagons, and large grain carts. Three swing positions, one on each
side of center, are obtainable by moving bolts which extend up
through the drawbar hanger on both sides of the drawbar. Six
drawbar mounting positions are available just like on the standard
drawbar. The high-capacity drawbar allows equal angle hitching
when necessary. The high-capacity drawbar has a vertical tongue
load rating of 4990 kg (11,000 lbs). The “auto pin” clevis is standard.
Heavy Duty Drawbar kit is available for all TG tractors.
Drawbar kit part number - 435788A1 (includes the auto-pin hitch
and mounting hardware).
Drawbar part number - 426511A1.
Motor Return and Power Beyond
An optional motor return kit mounts to the top of
the couplers on the left side. Motor return port
installation reduces back pressure in hydraulic
circuit return lines. This results in more efficient
hydraulic system operation. The motor return
consists of one return coupler (3/4˝) and one
case drain coupler (1/4˝). The motor return
housing is the same housing used for power
beyond applications without the lines,
connections, and couplers required for power
beyond functions. Note: The motor return kit is required for some
planting and seeding implements.
Power beyond provides a hydraulic supply port, a low
pressure return port, a sensing port, and a case drain
coupler (ported to reservoir). Power beyond provides a
versatile connection point for specialty hydraulic
applications.
IMPORTANT: The case drain coupler should only be
used for low flow, case drain applications. Transmission
lube pressure could be adversely affected if the case
drain coupling is used for other applications.
Note: For maximum performance, use only ISO Tips.